Inspectors ensure that structures and plumbing and mechanical systems are built according to approved plans and are properly located on a parcel.

Inspections are generally conducted between 8:30 am and 4 pm Monday through Friday. We do not have morning or afternoon scheduling, nor do we do inspections by appointment. Inspection timing is based on geographic routing to provide the best overall service levels.

Take a look at our nationally recognized video inspection program.

Mechanical and plumbing inspections

We require ALL push-pull and permitted repair work for mechanical and plumbing installations to be inspected upon completion by the installer on-site via our Sherlook remote video inspection service.  

We have had remote inspections since 2012 and are now moving to utilize it on a wider basis when it is viable. There will be some times when an inspection cannot be completed by video inspection and in that case a regular site inspection will need to be scheduled.

In the past, scheduling these inspections was often left to the homeowner which is inefficient. Having the tech on-site allows them to make corrections immediately.

To request a Sherlook inspection, call your inspector, call the Sherlook request line at 564.397.2069, or email Sherlook@clark.wa.gov. The web based application allows an inspector to initiate a Sherlook inspection by sending a text to the customer with a web link. When the customer opens the web link they are then connected to the inspector automatically (they are prompted to allow camera, audio, location). We are also able to use Facetime and Skype applications. If a contractor is at a location with WiFi, it is best if they can get a log-in or use a community WiFi for best connection.

Pre-Construction Erosion inspections

Note: An INS-100 Pre-Construction Erosion inspection must be scheduled and performed PRIOR to scheduling a Footing Steel (110) and/or Zoning Setback (130) inspection. This applies to these permit types: ADS, CEL, CMN, MFR, MBH, NHC and ACC for garage, shed, or shop. Upon re-inspection, failure to comply with the first correction notice will result in a fee of $148. Failure to comply with subsequent re-inspections will result in a $296 fee each.

Inspection requests

You may request an inspection online or by phone. Inspection requests must be made by 10 pm the day before the requested inspection. Next day inspections are not guaranteed. 

Remote Video Inspections - We require remote video inspections on some residential plumbing and mechanical inspections, however, there are many other residential inspections we can do using remote video. Find out more about remote video inspections, including how to schedule one. 

Phone/Text - Our IVR system is available for scheduling inspections for permits in CC LMS only. You can schedule by phone or by text. For permit types and inspection codes, use our IVR Inspection Requests guide. You will need to provide the following:

• Name
• Phone number
• Permit/Case number
• Inspection code listed on your permit
• A short message for your inspector, if necessary

To request an inspection by phone, dial 564.397.2477. Follow the prompts.

To request an inspection by text, start a text message at 866.714.5489 and text SCHEDULE, CANCEL or RESCHEDULE. Follow the prompts.

Online - Use the table below to determine which online inspection request system you should use. 

Alternative inspection services

Sherlook: Video inspections for some types of inspections are available through our Remote Video Inspection service. Contact us at Sherlook@clark.wa.gov or call 564.397.2069 to see if your project qualifies.

Status and results

You may contact your inspector after 9 am for an approximate inspection time. We try to complete all requested inspections daily, but this is not always possible.

Visit our Permit Status page to see the status of your permit and inspection information.

Inspectors

Use this map to determine the inspector for your area.